[. . . ] Used to access tasks and enter data.
CS-175-275-575 Series · LCD User Guide 5
protected.
system. Thisallfunction key part arms yourthe perimeter it disarms interior zones but leaves
Preparing your system
System Not Ready For help, press
LCD Message: Your system is NOT ready to be turned on, doors or windows might be open. User Action: Use the up/down arrow.
j or k S
X Fault Zone X
or
X Bypass Zone X
LCD Message: Zone information.
iS
X Fault Bypass Zone X
User Action: Press the bypass key if you want to bypass (exclude) a zone, so you can arm part of your system.
or
X Okay Zone X
LCD Message: Zone information.
@S
System Ready Type code to arm
User Action: Press #. LCD Message: Your system is ready to be turned on.
CS-175-275-575 Series · LCD User Guide
6
Turning on your system
OPTION 1: Using the function keys (This feature must be programmed by the installer. )
System Ready Type code to arm
LCD Message: Your system is ready to be turned on. [. . . ] The fire LED goes off if all detectors have been reset.
$ èS
System Ready Type code to arm
CS-175-275-575 Series · LCD User Guide
13
Changing user codes
System Ready Type code to arm
LCD Message: The system is ready to be turned on.
$ (S
Please Enter Your Code
User Action: Press * 5. LCD Message: The system asks for a master user code.
eS
Enter 2 digit ID
User Action: Enter your master user code.
LCD Message: Enter the two digit ID for the new or existing user. User Action: Enter the user ID, for example 18, or # to cancel operation. LCD Message: Enter the new code for this user.
&!S or @S
Enter new code 18 * * * *
§(`" S
User Action: Type the new user code, for example, 6543.
CS-175-275-575 Series · LCD User Guide 14
Deleting user codes
System Ready Type code to arm
LCD Message: The system is ready to be turned on.
$ (S
Please Enter Your Code
User Action: Press * 5. LCD Message: The system asks for a master user code.
eS
Enter 2 digit ID
User Action: Enter your master user code.
LCD Message: Enter the two digit ID for the new or existing user. User Action: Enter the user ID, for example 18, or # to cancel operation. User Action: Press G four times to delete the current user.
&!S or @S ggggS
CS-175-275-575 Series · LCD User Guide
15
Setting the keypad tone
System Ready Type code to arm
LCD Message: The system is ready for arming.
$à S
Raise tone Lower tone
User Action: Press * 0. LCD Message: You will hear the current tone.
jor k S @S
User Action: Use up/down arrow to adjust the keypad tone.
User Action: Use # to accept the tone you like.
CS-175-275-575 Series · LCD User Guide
16
Setting the system clock
System Ready Type code to arm
LCD Message: The system is ready to be turned on.
$çèS
Please Enter Your Code
User Action: Press * 97. LCD Message: The system asks for a user code.
eS
User Action: Enter your user code.
CS-175-275-575 Series · LCD User Guide
17
Setting the system clock (continued)
Wed 16:09 29 November 01
LCD Message: Current date and time are shown. User Action: Use the up/down arrow to change the hour, then minutes, day of the week, day of the month, month and year. User Action: After you have the correct value, press * to move to the next item in the list. LCD Message: After selecting the year, the system will bring you back to the first step.
jor k S $S
System Ready Type code to arm
CS-175-275-575 Series · LCD User Guide
18
Viewing zone status
System Ready Type code to arm
LCD Message: The system is ready to be turned on.
$j S
1 Okay Living room
User Action: Press * and up arrow. LCD Message: The first zone is shown.
jor k S
2 Okay Bed room
User Action: Use either up or down arrow to scroll.
LCD Message: The second zone is shown.
jor k S
3 Okay Front entrance
User Action: Use either up or down arrow to scroll.
LCD Message: The third zone is shown.
@S
User Action: Press # to exit this menu
CS-175-275-575 Series · LCD User Guide 19
Viewing alarm memory
System Ready Type code to arm
LCD Message: The system is ready to be turned on.
$" S
3 Alarm Mem. LCD Message: The first alarm in memory is shown.
jor k S
5 Alarm Mem. Zone 5
User Action: Use either up or down arrow to scroll.
LCD Message: The second alarm in memory is shown.
jor k S
6 Alarm Mem. Zone 6
User Action: Use either up or down arrow to scroll.
LCD Message: The third alarm in memory is shown.
@S
User Action: Press #, to exit this menu.
CS-175-275-575 Series · LCD User Guide 20
Reading the event log
System Ready Type code to arm
LCD Message: The system is ready to be turned on.
$ çà S
Please Enter Your Code
User Action: Press * 90. LCD Message: The system asks for a user code.
eS
Event Date/Time
User Action: Enter your user code.
User or zone
Open 5 9/25 17:32
P3*
Partition
LCD Message: User 5 has opened partition 3 at 17:32 on September 25th. User Action: Use up/down arrow to scroll through the events.
jk S
Close 5 9/25 17:32 P2*
* The event has not been reported to the central station.
LCD Message: User 5 has closed partition 2 at 17:32 on September 25th. [. . . ] Forced arming An option that allows the system to be armed with one or more zones open. Group bypass An option that allows the user to bypass multiple zones with a single operation. This is the text display which gives you information about your system. Master user code A master arm/disarm code that can also program parts of the system. [. . . ]